Making my DIY fluorescent ring light $50

I wanted a ring light I could use for video with my iPhone and camera. I didn’t understand the ballast thing for a while, but then, I realized that each ballast tells you what model number of light tube to use. So, I found the light tubes I wanted, then searched for the ballast that would work.

I saw tutorials for making LED ring lights and they seemed really complicated. This one isn’t complicated, but it wasn’t as simple as it could have been – e.g. if I used a shiny tray instead of an oil drip pan and foil tape, that would have removed a step. I probably could have gotten some proper hardware for mounting to the tripod (or light stand) also, then I wouldn’t have needed to make that wooden thing.

I think the only thing you can’t see in the photos below is that I put washers around two wood screws and screwed through the pan into the wooden cross to connect them.

I use a camera behind the ring and an iPhone in front of the ring.

12in Light Tube
8in Light Tube
Fluorescent Ballast
Plug Thing

Plus this stuff

dollar store aluminum foil tape
dollar store oil pan
old duct tape roll
scrap wood
1/4″-20 insert nut (for mounting it to a tripod) (home depot)
matte black paint
gaffers tape
zip ties
wood glue
screws (dollar store)
washers (dollar store)

IMG_4300

IMG_4301

IMG_4302

IMG_4303

IMG_4304

IMG_4307

IMG_4308

IMG_4309

IMG_4310
IMG_4319

IMG_4315
Mounted on a tripod with camera behind mounted on another tripod

IMG_4317
My JOBY phone holder wedges into the tube pretty nicely when an iPhone 5s is in it with case.
That’s how I took this photo.
IMG_4306


Posted

in

by

Tags:

Comments

One response to “Making my DIY fluorescent ring light $50”

  1. […] a fan of right lights and think they were an awesome solution to solve all shooting issues. I even built my own when they were hard to get. The three main things I want to solve with video / photo of a […]

Leave a Reply